Hackaday

Embroidery machine, with 3D, printed parts

Posted on Updated on

According to Hackaday, “Embroidery machine, with 3D, printed parts. Arduino components combined with 3D printed parts. OpenBuilds® V-Slot Belt & Pinion System.Such as an Arduino and stepper drivers for an economical DIY solution. It’s not shown in the photo here, but we particularly like the 3D printed sockets that are screwed into the tabletop. These hold the sewing machine’s “feet”, and allow it to be treated like a modular component that can easily be removed and used normally when needed.”

V-Slot™ Belt & Pinion Example Build

OpenBuilds

AND HE COULD HAVE BEEN THE FATHER OF 3D PRINTING

Advertisements

3D Printed Electric Unicycle

Link Posted on Updated on

3D Printed Electric Unicycle

———————————-

 

Actually riding around at 30 km/h on a 3D printed means of transportation is pretty gnarly, if not foolhardy. So we were actually pleased when we dug deeper and discovered that [E-Mat]’s unicycle build is actually just a very nice cover and battery holder. We say “just”, but a 3D-printed design takes a couple of…

via 3D Printed Electric Unicycle — Hackaday

Formlabs Announces a Desktop SLS 3D Printer

Link Posted on Updated on

Formlabs Announces a Desktop SLS 3D Printer


Nylon 3D Printer can help us making several useful things. This is so cool, SLS is Desktop 3D Printer.

This is expensive, but later on like we can have small, thin computers. We can have small and inexpensive 3D Printers too. 🙂

 

Formlabs have just announced the Fuse 1 — a selective laser sintering (SLS) 3D printer that creates parts out of nylon. Formlabs is best known for their Form series of resin-based SLA 3D printers, and this represents a very different direction. SLS printers, which use a laser to sinter together models out of a powder-based material, […]

via Formlabs Announces a Desktop SLS 3D Printer — Hackaday

Get Subpixel Printing With a DLP 3D Printer

Link Posted on Updated on

 

Get Subpixel Printing With a DLP 3D Printer

————————————————–

 

 

A DLP 3D printer works by shining light into a vat of photosensitive polymer using a Digital Light Processing projector, curing a thin layer of the goo until a solid part has been built up. Generally, the resolution of the print is determined by the resolution of the projector, and by the composition of the polymer itself. […]

via Get Subpixel Printing With a DLP 3D Printer — Hackaday