Successful 3D 4D 5D Printing Business and Stocks

Polaris Profits From 3D Printing

Posted on

Polaris Profits From 3D Printing.

https://www.stratasysdirect.com/

https://stratasys.hubs.vidyard.com/

watch/2nQur9DyWjL8XwTX54sHdd?

Advertisements

The 3D printing a healthier world for everybody

Posted on Updated on

According to Materialise,” 3D printing is a slow revolution. But it is a revolution regardless when you consider what the technology does: saving lives, enabling new business models, redefining how we design products. But none of that happened overnight. The revolutionary nature of 3D printing grew over the decades, formed on a foundation of small but valuable steps.”

 

 

https://www.materialise.com/en/medical

Embroidery machine, with 3D, printed parts

Posted on Updated on

According to Hackaday, “Embroidery machine, with 3D, printed parts. Arduino components combined with 3D printed parts. OpenBuilds® V-Slot Belt & Pinion System.Such as an Arduino and stepper drivers for an economical DIY solution. It’s not shown in the photo here, but we particularly like the 3D printed sockets that are screwed into the tabletop. These hold the sewing machine’s “feet”, and allow it to be treated like a modular component that can easily be removed and used normally when needed.”

https://openbuilds.com/builds/v-slot%E2%84%A2-belt-pinion-example-build.97/

http://www.openbuilds.com

https://www.ozy.com/flashback/and-he-could-have-been-the-father-of-3d-printing/81198#.WeXu6REalHI.twitter

Materialise reports the Second quarter and now, 2019 results

Posted on Updated on

Materialise incorporates nearly 30 years of 3D printing experience into a range of software solutions and 3D printing services, which form the backbone of the 3D printing industry.
According to Materialise,” Let’s discuss ways how we can empower people to design, collaborate, build, and fabricate in more sustainable ways, while reducing waste, saving money, and staying competitive. At the end of the second quarter of 2019, the total commitment of lease assets and liabilities amounted to 5,050 kEUR. Our Adjusted EBITDA for the second quarter of 2019 was affected positively by the new standard as a result of the rental payments decrease of 644 kEUR; however, our operating profit was impacted by only 52 kEUR as depreciation expenses increased by 593 kEUR.
Materialise, Will acquire a mix of existing and new shares bringing its total shareholding to 75%, with the founding shareholders retaining the remaining 25%. All shares will be fully paid for in cash at the closing, which is expected to take place during the week of August 5, 2019.”

According to Materialise reports the Second quarter and now, 2019 Results, Executive Chairman Peter Leys commented, “In spite of a macro-economic environment that continues to be challenging, Materialise reported another quarter of top-line growth. This was mainly driven by Materialise Medical, which continued to perform strongly with solid revenue growth and EBITDA performance, and also by Materialise Manufacturing, which realized a double-digit EBITDA margin and grew its revenues for the third consecutive quarter.

This quarter, the contribution by Materialise Software to our revenue growth and Adjusted EBITDA margin was below our expectations as a number of sales were pushed out to the second half of the year. Our outlook for 2019 remains within our previous guidance range, with our results now including expected contributions from our August acquisition of a 75% stake in Engimplan.

This investment, which will enable us to introduce the benefits of Materialise’s patient-specific 3D printing implants and expertise to the fast-growing Brazil market, is part of our strategy to accelerate our growing presence in the additive manufacturing ecosystem through carefully selected acquisitions and partnerships.”

https://www.materialise.com/en

https://www.materialise.com/en/press-releases/materialise-reports-second-quarter-2019-results

Relativity Space to build the first rocket 3D Printing factory

Posted on Updated on

With backing from NASA, rocket startup Relativity Space is creating the first autonomous rocket factory. The company is planning to produce 95% of rocket components with 3D printing, and the first orbital launch is expected in late 2020.

 

This is a guest contribution by Egor Driagin, Chief Marketing Officer at Top 3D Shop

image1.png

Source: www.relativityspace.com

The new agreement will provide the California-based startup with exclusive access to NASA’s infrastructure and financial aid from the Mississippi Development Authority for building a large-scale highly automated 3D printing rocket factory. The company will lease a 20,000-square-meter building at NASA’s John C. Stennis Space Center for nine years. The test stands and all the necessary equipment on the site allow for convenient engine testing. The agreement provides an option to extend the lease for another 10 years. The company aims to create 200 jobs and invest $59 million in the state. In exchange, the state of Mississippi offers a reimbursement of expenses and a tax incentive package.

image2.jpgSource: www.relativityspace.com

The new factory will produce Relativity Space’s first 3D printed rocket – Terran 1. This vehicle can carry up to 2,756 lbs. into low Earth orbit. Both stages will be powered by 3D printed Aeon engines fueled by methane and liquid oxygen. The first stage will be powered by nine engines, stage two will be equipped with only one. The rocket is priced at $10 million per launch. It is expected that due to the use of the 3D printing technology the manufacturing cycle will not exceed 60 days. 

Although the company is planning to construct its own launch facility, the first rockets will be launched from Cape Canaveral. The launchpad and all the supporting infrastructure will be provided by the U.S. Air Force. The company was allowed to use Launch Complex (LC) 16, which was built for tests of Titan I and Titan II, and then Pershing I and Pershing II missiles. The last launch took place there in 1988. 

image3.png

 

Source: www.relativityspace.com

Most of the metal parts will be manufactured by Stargate, Relativity Space’s first 3D printer. The scalable system features multi-axis robotic arms with lasers. The machine uses metal wire feedstock as a printing material. In February 2019, Relativity Space was granted a machine learning 3D metal printing patent, issued for “real-time adaptive control of additive manufacturing processes using machine learning” (US20180341248A1).

“This agreement demonstrates again NASA’s commitment to work with our industry partners to expand commercial access to low Earth orbit. This helps NASA maintain focus on the ambitious Artemis program that will land the first female and the next male on the south pole of the Moon by 2024,” said Rick Gilbrech, director of  Stennis Space Center. “Relativity is a valuable member of the Stennis federal city and we look forward to building on our already successful partnership.”

The first orbital launch is expected in 2020. The company is planning to enter the commercial market in 2021.

 

Johnston Uses 3D Printing to Meet Needs of Alzheimer’s Center Residents

Posted on Updated on

The chancellor of UAFS College of Applied Science and Technology’s 3D printing lab Dr. Terisa Riley and Methodist Village CEO Melissa Curry,” develop an initial set of 3D-printed nuts and bolts to aid residents’ cognitive stimulation.
The faculty at UAFS are deeply skilled, both as educators and as experts in their fields. It’s exciting to see our mission as a comprehensive regional institution fulfilled in their commitment to serving the citizens of the River Valley through innovative partnerships like these. When planning for our Alzheimer’s Special Care Community, we knew it was important to have the right sensory stimulation. They also mention We ordered life-like robotic cats and dogs for allergen-free pet therapy and installed interactive art throughout the halls.”

https://uafs.edu.

https://news.uafs.edu/news/5146

Home

Materialise’s additive manufacturing webinar(3D Printing upcoming Events, Conferences)

Posted on Updated on

3D Printing upcoming Events, Conferences

https://wp.me/p64ptu-2tD

According to Materialise, “you will discover how Streamics, as an AM production management and control system, enables service providers and bureaus as well as end-part manufacturers to get the most out of the potential that 3D printing has to offer.”

7 AUG 2019

ONLINE, BELGIUM

https://www.materialise.com/en/events/software/how-efficiently-manage-am-activities-with-streamics

https://www.materialise.com

The Lightyear One is 3D printed

Posted on Updated on

More than 55 interior parts for the Lightyear One are 3D printed.
According to Lex Hoefsloot, CEO of Lightyear announces and Robert Llewellyn, ” gets an exclusive first look at the Lightyear One hyper-efficient luxury sedan, a partially solar-powered electric car. And gets to experience it as one of the first passengers!

When Solar Team Eindhoven won the world solar challenge in Australia driving a 4 seater 100% solar-powered car over 3,000 kilometers, no one would have believed that a handful of years later they could come up with this.
Lightyear One. A spacious hyper-efficient partially solar-powered electric car.
We know the future is electric, could it be solar electric.”

 

 

 

 

https://lightyear.one/

https://www.fabbaloo.com/