3D Printing Business

3D printed Terran 1

Posted on Updated on

According to Relativity Space is a private American aerospace manufacturer company headquartered in Los Angeles, California, “Relativity Space was founded on the idea that Blue Origin and SpaceX were not doing enough to use 3D printing as part of rocket manufacturing. Relativity plans to 3D print an entire launch vehicle they call Terran 1. The extensive use of 3D printing has allowed the company to iterate designs quickly, use less tooling and human labor. In March 2018, Relativity Space signed a 20-year lease at the John C. Stennis Space Center, a NASA rocket testing facility, to test engine components and eventually test full-scale Aeon 1 rocket engines.
The company says it will launch its first rocket named Terran 1 from the site in 2020. Relativity plans to start commercial launch service by early 2021.”

Relativity Space

Relativity, a company 3D printing entire rockets, raises $140 million from venture firms Bond, Tribe

RAW MATERIAL TO FLIGHT

Advertisements

3D printed clear aligners

Posted on Updated on

3D printed clear aligners. According to Clinique Dentaire Casablanca, “The Invisalign system is a combination of proprietary virtual modeling software, rapid manufacturing processes, and mass customization, and virtually clear, removable appliances or “aligners” that are used to straighten teeth.”

From comments,

Andrew Thiyam
1 year ago
Can Invisalign also correct “Deepbite” to some extent??

CoChief Emeralds
9 months ago
I have those Invisalign trays for 8 more months

CoChief Emeralds
9 months ago
It took 8 to 10 weeks for my aligners to be ready because they had to do a quality check and all that good stuff let alone deciding if I need attachments on my teeth.

 

We use cutting-edge technology to manufacture best-in-class Clear Aligners

Manufacture Your Next 

Hasbro To Eliminate Plastic Packaging

Posted on Updated on

According to Hasbro, “one of the world’s largest toy manufacturers, has stepped up its sustainability game and is phasing out all plastics used to package its toys and games by the end of 2022. phasing out plastic from new product packaging, including plastic elements like polybags, elastic bands, shrink wrap, window sheets, and blister packs.3D printed toy designers should ramp up their knowledge about alternative sustainable materials.”

Hasbro Says It’s Game Over For Plastic Packaging

About Hasbro

Hasbro To Eliminate Plastic Packaging

Worldwide 3D Printing Markets, 2019-2023

Posted on Updated on

Worldwide 3D Printing (Additive Manufacturing) Markets, 2019-2023 – Driven by the Increasing Number of Approved 3D Printed Medical Products by FDA.
According to research and markets,” fastest-growing regional market in North America, due to early-stage adoption of 3D printing technologies and rise in application of 3D printing, specifically in the industrial area. Europe and the Asia Pacific are also contributing considerably to the global 3D printing market, with the increasing adoption and application of 3D printing in various industries, specifically automobiles, and aerospace.”

 

Worldwide 3D Printing (Additive Manufacturing) Markets, 2019-2023 – Driven by the Increasing Number of Approved 3D Printed Medical Products by FDA

Global 3D Printing (Additive Manufacturing) Market: Insights, Trends, and Forecasts (2019-2023)

The world’s first 3D printed brake caliper

Posted on Updated on

The world’s first 3D printed brake caliper.
According to
Volkswagen Group, “The world’s largest 3D printed titanium pressure functional component ever produced on one of the most powerful brake test benches on the market! This is what it looks like when Bugatti prepares its first printed titanium brake caliper for series production.”

From comments,

Niels Cremer
Niels Cremer
7 months ago
Can 3d print brake calipers, can’t take higher frame rates for slow motion footage.

Reaper5.56 Xx
7 months ago
Can you 3d print better emission test.

Bassam Al-Rawi
7 months ago
Which 3D printer was used 😁

Qwerrrz
7 months ago
Looks like 3d printing just reached a new level. That’s insane.

Insert coolname
7 months ago
This is nothing new. I´ve seen 3D printed brake calipers in Formula Student cars.
vaporainwaves
7 months ago (edited)
I am pretty sure koenigsegg was faster to produce a functional 3D printed component from titanium. Outrageous.

MOTO-079
7 months ago
3d printed… still needs machining or are the brake pistons just gliding on a printed serves…

Callen Hurley
7 months ago
3D printing is the future of production.

Phar2Rekliss
7 months ago
Now lets see what 3D printed Inconel 750 parts can handle! Inconel is the next step level in material from Titanium for these kinds of purposes.

eLike
7 months ago
This brake caliper is made in ABS, people with a 3D printer will understand this.

Gavin 363
7 months ago
I’d be more impressed if the rotor was 3d printed.

Zachary Gamble
7 months ago
Not sure I would want a 3D printed caliper on my million dollar car.
SPIRIT01
7 months ago
Cnc machine is like a 3d metal printer , been around for a couple of years , idk I thought brembo and ceika , and all those other big brake kits I thought they had already printed out calipers.

sam sl
7 months ago
Just because things are 3D printed does not mean they are better.

kym516
7 months ago
Just saying, other manufacturers may have tested this idea before. I mean a 3d printed caliper can have lighter weight and better thermal control which is obvious enough for researches to be done. But still, good marketing peace of work. Hope this amazing technology can be used on consumer cars.

Boris Diamond
7 months ago
How hot was the calliper getting and how much was it deflecting? Mechanical properties are reduced at high temperatures, it’s impressive that it survived the test but I would like to know if it yielded or not and how many high load/temperature cycles it is capable of. It should be ok being Ti.
Oddvin Lorenzo Preinstad
7 months ago
3d printed car parts are probably normal in the future, imagine if your car breaks down and you have it brought to a mechanic. Today that mechanic has to order the parts which will take at least multiple days, with 3d printed parts it is a matter of hours,
.

Bugatti speeds up testing on its 3D-printed titanium brake caliper

Bugatti 3D printed titanium brakes to stop its $3 million Chiron supercar

Jabil’s plan for $42M medical 3D printing with 24 percent core EPS growth

Posted on Updated on

According to St. Petersburg-based Jabil (NYSE: JBL),” is set to make a $42 million investment in Albuquerque, New Mexico for technology and equipment as it makes the Duke City its “center of excellence” for 3D printing, officials announced on Aug. 15. The company said it plans to hire 120 employees in the next five years.”
According to New Mexico Gov. Michelle Lujan Grisham said in a statement “We have all the talent in the world right here in New Mexico, and when we build the infrastructure for a 21st-century economy, we will see more young adults stay here and more homegrown talent return here.”
According to CEO Mark Mondello, “I’m extremely pleased with our third-quarter performance, highlighted by solid operational excellence and strong financial results. The team delivered 20 basis points of core margin expansion on double-digit revenue growth, culminating in an impressive 24 percent core EPS growth, year-over-year. Our strong year-to-date results validate that our diversification strategy has firmly taken hold.”

Delivering insoles in 1/2 the time, at a fraction of the cost.

3D Printing Breaking Through the Barriers in Manufacturability

JABIL

Medical Device Mechatronics

Jabil Unveils Plans for $42M Medical 3D Printing Center of Excellence

Jabil unveils plans for $42M medical 3D printing center of excellence

Jabil: Florida manufacturing giant announces plans to invest $42M, create 100+ jobs in New Mexico

Florida manufacturing giant announces plans to invest $42M, create 100+ jobs in New Mexico

Embroidery machine, with 3D, printed parts

Posted on Updated on

According to Hackaday, “Embroidery machine, with 3D, printed parts. Arduino components combined with 3D printed parts. OpenBuilds® V-Slot Belt & Pinion System.Such as an Arduino and stepper drivers for an economical DIY solution. It’s not shown in the photo here, but we particularly like the 3D printed sockets that are screwed into the tabletop. These hold the sewing machine’s “feet”, and allow it to be treated like a modular component that can easily be removed and used normally when needed.”

V-Slot™ Belt & Pinion Example Build

OpenBuilds

AND HE COULD HAVE BEEN THE FATHER OF 3D PRINTING

Physna: Compare thousands of 3D models in seconds

Posted on Updated on

 

Physna: Compare thousands of 3D models in seconds,
According to Physna’s CEO Paul Powers and Glenn Warner, “Through revolutionary artificial intelligence, Physna uses advanced algorithms to dissect and analyze 3D objects in the blink of an eye.
Many companies have collectively spent billions of dollars on this problem. The reason that Physna is the first to actually fix it is that we used a fundamentally different type of technology.
Compare your IP with others in seconds, ensuring that you’re using the correct models and nobody else is using your designs. Promptly determine if a 3D object matches your standards, allowing you to get to market quicker. Find any 3D object in seconds, old or new, helping to keep department and operation costs to a minimum. Compare any two models instantly and see exactly how much they match with total accuracy and reliability. We call those facets. Everything in nature can be broken down into triangles. We basically analyze the relationship of facets to each other and to the surrounding environment.”

Physna_Logo_Color_2x.png

Don’t phear the phunny name: Physna could soon be a $1 billion software company

The Midwest is the opportunity of our lifetime

 

Physna raises $6.9 million to develop “Google of 3D models”

3D printers in or near rural health facilities

Posted on Updated on

According to HESE director John Gershenson, “For too long, people have lacked access to appropriate medical care just because of where they were born. Now, the entire world will know that Penn Staters are helping to right that wrong. We’ve been exploring the idea of installing these 3D printers in or near rural health facilities, training staff members and local entrepreneurs there how to use them and creating the necessary support systems. If these facilities can make those hard-to-get items for themselves, they could keep running their facility the way they need to rather than having to import everything from other countries.”

For rural areas in Kenya, healthcare accessibility has been and continues to be, a growing concern—one that the Kijenzi venture hopes to solve by providing accessible and affordable medical education tools.

According to Ben Savonen, “this is a very experimental project, but, as some of the components of its work out, it will have a huge impact.”

https://wp.me/p64ptu-2tg

Kijenzi is one of many ventures in the Humanitarian Engineering and Social Entrepreneurship program that approaches real-world issues with Penn State know-how.

Sand 3D Printer before and now

Posted on Updated on

According to Sculpteo, “Binder Jetting printers spread a layer of the material and then bind it with an agent, which solidifies the particles. A layer for sand 3D printer is 140-200 micrometers.”
According to Markus Kayser,” he talks about ‘desert manufacturing’: a combination of solar power and 3D printing to create objects made entirely out of the sand. As a product designer, he has created a variety of beautiful objects only using the sun and sand.”
According to ExOne’s digital part materialization,” (3D printing) process for printing sand casting molds and cores, beginning with a digital file, going through solidification analysis, printing and finally casting a finished industrial part.”
Comments 4 years ago,
also side topic, I still think bricks made from lava would be a good cheap way to get building materials, you could scoop lava into brick molds with industrial robots and also if you push a magnetic field thru the lave as it cools you could leave a build signature in the structure, that could be used in the future to date and specify where it was made sort of like a bar code but magnetic. but still, lava is still a good material that is underused.
According to AFS MCTV, “I want to see it get to the point where a 3D printer in a desert would be able to print the components for another printer.
This webinar covers the basics of additive manufacturing as well as explains the technology used to create molds and cores with a 3D printer. Led by Dave Rittmeyer and Steve Murray, both of Hoosier Pattern, the webinar will give attendees full access to two industry veterans who have worked in metal casting for a combined 50 years. Attendees will have the opportunity to ask questions, learn from industry experts and see examples of how 3D printed sand has been used within the metal casting industry.”
According to Meimad3, “World’s largest commercial 3D printer (printing volume 4x2x1 meters) – for printing Sand-Cast mold parts for the metal cast.”
According to General Foundry Service, “3d Printed Sand Molds.”
The webinar will cover the basics and explore how to utilize 3D printed sand components on your next project.
Category
7 months ago
You could print big columns in low spots to serve as pilings. Then, you can cap the area with a walking machine so the structure doesn’t get buried. Over time, the additional capped ground will develop a white color which reflects the sun. You could print tunnels and bury them so they stay cool.
The 3rd Sand Printer is Here!
https://wp.me/s64ptu-9486

 

Is a sand 3D printer the future of Additive Manufacturing?