3D Printing before and now

3-D-printed alloys

Posted on Updated on

In the opinion of Lead author and Ph.D. candidate from RMIT University’s School of Engineering, Carmelo Todaro, “the promising results could inspire new forms of additive manufacturing.
If you look at the microscopic structure of 3-D printed alloys, they’re often made up of large and elongated crystals.
This can make them less acceptable for engineering applications due to their lower mechanical performance and increased tendency to crack during printing.
But the microscopic structure of the alloys we applied ultrasound to during printing looked markedly different: the alloy crystals were very fine and fully equiaxed, meaning they had formed equally in all directions throughout the entire printed metal part.”

https://phys.org/news/2020-01-ultrasound-stronger-d-printed-alloys.html

 

Ultrasound can make stronger 3-D-printed alloys

Advertisements

3D Printing Resin for Night Guards and Splints

Posted on Updated on

KeySplint Soft™ Clear by Keystone Industries®, a Unique 3D Printing Resin for Night Guards and Splints Available Exclusively on the Carbon® Digital Manufacturing Platform, Cleared for Sale by U.S. FDA. According to Keystone Industries, “They developed industry-leading products like Diamond D® high-impact denture base, the Pro-Form® line of thermoplastics, innovative and patent-protected laboratory offerings, such as Enamelite ceramic spray glazes and the winner of Dental Advisor’s top product of the year, our Gelato prophy paste. Keystone has spent nearly three decades formulating and producing biocompatible, cutting-edge, patented photopolymer resins for dental and cosmetic nail applications. Keystone maintains FDA licensing, ISO 13485 (medical device) and 22716 certifications, along with GMP certification and international product registrations.”

KeySplint Soft™ Clear by Keystone Industries®, a Unique 3D Printing Resin for Night Guards and Splints Available Exclusively on the Carbon® Digital Manufacturing Platform, Cleared for Sale by U.S. FDA

Keystone Industries

3D Printing Event Anaheim 2020

Posted on Updated on

As reported by, Advanced Manufacturing Events, “Are you implementing 3D Printing at your company? Do you need technical education and expert advice to make major business decisions? Whether you’re an engineer working in aerospace, a C-suite executive in manufacturing, or any other type of professional looking for solutions to streamline operations, the Automation Technology Expo (ATX) West will give you the education and connections needed to make the right choices for your projects or business. Get your free expo pass.”

Did You Know That by 2021*
Please check-
THE WEST COAST’S

75% of new commercial and military aircraft will fly with a 3D printed engine, airframe, and other components…

February 11-13, 2020
Anaheim Convention Center
Anaheim, CA

 

3D PRINTING IN THE SPOTLIGHT

Welcome to ATX West 2020 Registration

THE WEST COAST’S 

Siemens is purchasing Atlas 3D

Posted on Updated on

According to Zvi Feuer, senior vice president of manufacturing engineering software at Siemens Digital Industries Software, said in a company press release, “We welcome Atlas 3D to the Siemens community as the newest member of our additive manufacturing team. Our solutions industrialize additive manufacturing for large enterprises, 3D printing service bureaus, design firms, and CAD designers. The cloud-based Sunata software makes it easy for designers to determine the optimal way to 3D print parts for high quality and repeatability. The combination of Sunata with the robust CAE additive manufacturing tools in Simcenter enables a ‘right first-time’ approach for industrial 3D printing.”

 

Siemens Buys Indiana-Based 3D Printing Software Firm

We are Siemens in Germany

More than 3000 highly inspiring followers and amazing guest writers with 1000 posts.

Posted on Updated on

  1. Thank you so much for your support and nice comments. We started, 5 years and 9 months ago. We started with one follower – just me.
    Slowly we are increasing day by day. It’s like watching a newborn grow.
  2. We will try to provide our best work continuously.
    We have 1000 posts, more than 3000 highly inspiring followers and amazing guest writers.
    Thanks again for loving our 3D Printing website.
  3. Read, Like, Write and Follow is my MEDITATION.
  4. 🙂

Materialise reports the Second quarter and now, 2019 results

Posted on Updated on

Materialise incorporates nearly 30 years of 3D printing experience into a range of software solutions and 3D printing services, which form the backbone of the 3D printing industry.
According to Materialise,” Let’s discuss ways how we can empower people to design, collaborate, build, and fabricate in more sustainable ways, while reducing waste, saving money, and staying competitive. At the end of the second quarter of 2019, the total commitment of lease assets and liabilities amounted to 5,050 kEUR. Our Adjusted EBITDA for the second quarter of 2019 was affected positively by the new standard as a result of the rental payments decrease of 644 kEUR; however, our operating profit was impacted by only 52 kEUR as depreciation expenses increased by 593 kEUR.
Materialise, Will acquire a mix of existing and new shares bringing its total shareholding to 75%, with the founding shareholders retaining the remaining 25%. All shares will be fully paid for in cash at the closing, which is expected to take place during the week of August 5, 2019.”

According to Materialise reports the Second quarter and now, 2019 Results, Executive Chairman Peter Leys commented, “In spite of a macro-economic environment that continues to be challenging, Materialise reported another quarter of top-line growth. This was mainly driven by Materialise Medical, which continued to perform strongly with solid revenue growth and EBITDA performance, and also by Materialise Manufacturing, which realized a double-digit EBITDA margin and grew its revenues for the third consecutive quarter.

This quarter, the contribution by Materialise Software to our revenue growth and Adjusted EBITDA margin was below our expectations as a number of sales were pushed out to the second half of the year. Our outlook for 2019 remains within our previous guidance range, with our results now including expected contributions from our August acquisition of a 75% stake in Engimplan.

This investment, which will enable us to introduce the benefits of Materialise’s patient-specific 3D printing implants and expertise to the fast-growing Brazil market, is part of our strategy to accelerate our growing presence in the additive manufacturing ecosystem through carefully selected acquisitions and partnerships.”

Empowering your 3D printing applications

Materialise Magics 3D Print Suite

Sand 3D Printer before and now

Posted on Updated on

According to Sculpteo, “Binder Jetting printers spread a layer of the material and then bind it with an agent, which solidifies the particles. A layer for sand 3D printer is 140-200 micrometers.”
According to Markus Kayser,” he talks about ‘desert manufacturing’: a combination of solar power and 3D printing to create objects made entirely out of the sand. As a product designer, he has created a variety of beautiful objects only using the sun and sand.”
According to ExOne’s digital part materialization,” (3D printing) process for printing sand casting molds and cores, beginning with a digital file, going through solidification analysis, printing and finally casting a finished industrial part.”
Comments 4 years ago,
also side topic, I still think bricks made from lava would be a good cheap way to get building materials, you could scoop lava into brick molds with industrial robots and also if you push a magnetic field thru the lave as it cools you could leave a build signature in the structure, that could be used in the future to date and specify where it was made sort of like a bar code but magnetic. but still, lava is still a good material that is underused.
According to AFS MCTV, “I want to see it get to the point where a 3D printer in a desert would be able to print the components for another printer.
This webinar covers the basics of additive manufacturing as well as explains the technology used to create molds and cores with a 3D printer. Led by Dave Rittmeyer and Steve Murray, both of Hoosier Pattern, the webinar will give attendees full access to two industry veterans who have worked in metal casting for a combined 50 years. Attendees will have the opportunity to ask questions, learn from industry experts and see examples of how 3D printed sand has been used within the metal casting industry.”
According to Meimad3, “World’s largest commercial 3D printer (printing volume 4x2x1 meters) – for printing Sand-Cast mold parts for the metal cast.”
According to General Foundry Service, “3d Printed Sand Molds.”
The webinar will cover the basics and explore how to utilize 3D printed sand components on your next project.
Category
7 months ago
You could print big columns in low spots to serve as pilings. Then, you can cap the area with a walking machine so the structure doesn’t get buried. Over time, the additional capped ground will develop a white color which reflects the sun. You could print tunnels and bury them so they stay cool.
The 3rd Sand Printer is Here!
https://wp.me/s64ptu-9486

 

Is a sand 3D printer the future of Additive Manufacturing?