3D Printers/4D Printers/Extruders/Scanners/Cost/Tips and Tricks
The AnkerMake budget-friendly 3D Printer with top-notch performance
AnkerMake, the 3D printing branch of Anker, is making waves in the 3D printing industry by launching its latest innovation, the AnkerMake M5C. Offering impressive performance at an affordable price, the M5C is designed to cater to beginners and experienced users who seek reliable 3D printing capabilities without breaking the bank. The AnkerMake M5C shares a similar aesthetic with its predecessor, the M5, providing a clean and modern appearance. Removing the AI camera and LED screen contributes to the streamlined design, and all controls are accessible through the user-friendly app.
The M5C features a one-click-button that allows users to assign various automated tasks, such as pausing a print for color change or executing the 49-point leveling process. With multiple tasks programmable using different button actions, it offers convenience and versatility in operation. AnkerMake has equipped the M5C with an all-metal hot end, enabling the use of materials that require higher printing temperatures. This enhancement expands the range of materials that can be utilized with the printer, enhancing its versatility.
The M5C comes with a heated print bed that can reach temperatures of up to 100 degrees Celsius, enabling efficient printing of ABS and other materials requiring a heated bed. Unlike its predecessor, the M5C arrives fully assembled, eliminating the need for complex assembly. This simplifies the setup process and enhances the printer’s stability, resulting in more reliable and accurate prints. The AnkerMake M5C incorporates PowerBoost 2.0 technology, delivering faster print speeds and allowing users to enjoy rapid and efficient printing.
Anker Announces the M5C, a Simplified, More Affordable 3D Printer.
Mastering Cold Pulls: The Ultimate Guide to 3D Printer Nozzle Maintenance
The art of performing cold pulls to keep your 3D printer running smoothly and prevent disruptive nozzle clogs. This comprehensive guide explains the complicated pull technique, a simple yet effective method to remove debris and burnt material from the nozzle and filament pathway. The nozzle cleaning technique is crucial for maintaining a 3D printer. Nozzle clogs are a common challenge in 3D printing that can lead to failed prints and frustration. By using cold pulls between material swaps and regular 3D printer filament changes, you can avoid total clogs and keep your printer running at its best. Following steps can benefit,
Obtain a small section (around 30cm) of cleaning filament (preferably nylon).
Using a pair of flush cutters, snip a bit off the end of the filament diagonally to create a sharp point; If your 3D printer has a Bowden extruder, remove the Bowden tube connected to the nozzle end to access the filament pathway; Raise the nozzle from the bed to allow the purged filament to extrude without obstruction; If you have a Bowden extruder, heat the nozzle to the appropriate extrusion temperature for the loaded filament. Manually pull the filament out of the hot end while the nozzle is at operating temperature. If you have a direct drive extruder, use the unload routine in your printer firmware to extract the filament; Heat the nozzle to the extrusion temperature specified by the nylon filament manufacturer (usually between 250°C and 280°C). As the nozzle cools down, maintain constant downward pressure on the filament, allowing a tiny amount to ooze out of the nozzle for about 20 seconds; This compacts the molten nylon, filling the entire nozzle cavity and adhering to any burnt debris clogging the nozzle. Wait for the nozzle to cool down to around 50°C; Set the nozzle to heat up to 120°C; Grip the filament and maintain constant upwards pressure, like you’re trying to pull it out. The filament will be extracted from the nozzle while it is in the Goldilocks zone, where it has softened enough to let go of the nozzle but remains hard enough to hold onto the debris. You’ll hear a distinct popping sound when the process is successful; Use white or transparent nylon filament to easily spot burnt residue extracted from the nozzle; Repeat the process until you can no longer see filament residue after subsequent cold pulls.
Following these steps, you can effectively perform a cold pull to clean your 3D printer’s nozzle, prevent nozzle clogs, and maintain optimal printing performance. Incorporating hard pulls into your 3D printer maintenance routine will help you avoid disruptions and ensure high-quality prints. Remember to exercise caution and follow the manufacturer’s guidelines for your printer model. Master the cold pull technique with this step-by-step guide to ensure a successful hard pull while safeguarding your 3D printer’s extruder assembly. Follow instructions and enjoy smoother 3D printing with reduced nozzle clogs. From choosing the suitable filament to the proper heating and cooling intervals, optimize 3D Printer Maintenance for efficient Printing. Proper 3D printer maintenance is crucial for uninterrupted production and high-quality prints for businesses and enthusiasts. Incorporate regular cold pulls into your maintenance schedule to prevent downtime caused by nozzle clogs. By optimizing your 3D printer’s performance, you can increase productivity and deliver exceptional 3D printed products to your customers. Proactive maintenance ensures a reliable 3D printing workflow, boosting your business’s reputation and customer satisfaction.
Story by Nachiket Mhatre • 2h ago. How to Clean Your 3D Printer’s Nozzle With a Cold Pull.
- ← Previous
- 1
- 2
- 3
- …
- 209
- Next →