3D Printed Wearable Design

3D printed Halloween Jack-O-Lantern Earrings

Posted on Updated on

3D printed Halloween Jack-O-Lantern Earrings DIY. According to RJ Crafts, “this was fun and only took a few minutes to make! I never realized how much fun a 3D pen would be till I got one :D”.

Advertisements

Eden Prairie Company Makes 3D Printed Dresses

Posted on Updated on

According to Ryan Schultz, the Vice President of Vertical Marketing at Stratasys, “We can do full color, clear, flexible, rigid, all in one print, so the opportunities are nearly limitless.[Our] 3D printing technology is the only technology that can print at such a fine level, multiple colors within clear, to get that iridescent shimmering effect you see in a butterfly’s wing.”

From some comments,

Phenolphthalein
2 years ago
I wonder how much stronger it would be if you were to iron the plastic into the shirt through a sheet of parchment paper. That might help prevent the very slight peeling of the edges on the lion’s mane after the wash.
Cat3D
2 years ago
So I didn’t get it what your final settings are now to achieve the flawless result. 😆

Isaac Graham
2 years ago
Glad you used the flexible filament, It seems to work extremely well

Peter Woo
2 years ago
Been waiting for this 🙂 !!!

Peter Adlam
2 years ago
I wonder if using the ‘Avoid crossing outline for travel moves’ in the advanced tab of Simplify 3d would help to cut down on the stringing?

Miguel Velásquez Ferreiro
1 month ago
The flexible filament has resisted multiple washes?

WTF BBQ
2 years ago
will it survive in the dryer ??

Sailor Barsoom
1 year ago
That is GORGEOUS! If’n I ever get a 3D printer, I am so doing this.

Spcsmrf
2 years ago
Can you recommend where to buy 3d printers like the cr-10 in Sweden?

Peer Appel
2 years ago
Wow, I’m almost buying a 3d-printer just for this 🙂

Muhammad Agung
1 year ago
This print not beater than i3 Mega for flexibel filament?
Backis03
2 years ago
hey can I buy a RcLifeOn t-shirt of you?

Rotem Barzily
2 years ago
Should I buy the Anycubic Kossel as the first 3D printer?
ClickernVideo
1 year ago
Goodday ..
How large have you extruded the drawing ? 0.5 mm using a buse of 0.4 mm ?

Minas Giannopoulos
2 years ago
Did you do any mods on your CR-10 to print flexible material? Also can you share your Simplify3D settings you ended up using?

Sébastien Van Deun
2 years ago
This is absolutely amazing, I can’t wait to try it when my 3d printer will be set up to print flex filament!

Shit Storm
2 years ago
Anyone got a link for “good” flexible filament or brands from Aliexpress? I would be very thankfull 🙂
vidznstuff1
2 years ago
Hey Simon – thanks for responding to those of us with the torches and pitchforks regarding the flex filament. You blew my mind using a STOCK CR-10 to do this…please share the machine settings to get Ninjaflex successfully through a CR-10 extruder.

theodoros sirios
2 years ago
were did you buy the cords for your printers
what 3D printer i should buy Anet A8 or Anet A6

Alessio Ravoni
1 year ago
I can use any TPU filament?
David Reece
10 months ago
Machine washable?

Christoffer Nørskov
2 years ago
Oh nice, 3DEksperten is situated in the same city I live in, and is where I got my printer, and most of my filament.

roidroid
1 year ago
Slic3r has an option “Avoid crossing perimeters”, which stops the print-head from travelling over your clean lines and leaving goop everywhere. You may be able to find similar options in your slicer of choice.

Luke Turner
2 years ago
very interesting and a great idea ! (reminds me of the old 3D printer days when new things would be found every week!). you might get different results with different tshirts, as you get 100% cotton shirts then you get polyester shirts which have a % of plastic in them. this would get better results i dare say. but very interested might have a go my self at some point

Alluvian
1 year ago
Do you have any issues with priming the nozzle? I have not played with different slicers and startup gcode, but in cura for lulzbot it always prints the skirt around the base to prime the nozzle. Looked like you were manually priming the nozzle and turning off the skirt?

edwin k
2 years ago
Can you show your 3d printing files in free or cheap other software, because i am noet at school anymore so i must buy yhe 3d modeling en printing software.

Fer Jerez
2 years ago
Great video! I don’t know how to do it in S3D but Cura slicer has a ‘Combing mode’ that minimices retractions making the nozzle travel over the printed parts. I use it when printing flexible filaments making almost zero ‘stringing’. May you find it useful for this kind of experiments.
Great work!!

 

Eden Prairie Company Makes 3D Printed Dresses Worn At NY Fashion Week

Make it with Stratasys

 

Jabil’s plan for $42M medical 3D printing with 24 percent core EPS growth

Posted on Updated on

According to St. Petersburg-based Jabil (NYSE: JBL),” is set to make a $42 million investment in Albuquerque, New Mexico for technology and equipment as it makes the Duke City its “center of excellence” for 3D printing, officials announced on Aug. 15. The company said it plans to hire 120 employees in the next five years.”
According to New Mexico Gov. Michelle Lujan Grisham said in a statement “We have all the talent in the world right here in New Mexico, and when we build the infrastructure for a 21st-century economy, we will see more young adults stay here and more homegrown talent return here.”
According to CEO Mark Mondello, “I’m extremely pleased with our third-quarter performance, highlighted by solid operational excellence and strong financial results. The team delivered 20 basis points of core margin expansion on double-digit revenue growth, culminating in an impressive 24 percent core EPS growth, year-over-year. Our strong year-to-date results validate that our diversification strategy has firmly taken hold.”

Delivering insoles in 1/2 the time, at a fraction of the cost.

3D Printing Breaking Through the Barriers in Manufacturability

JABIL

Medical Device Mechatronics

Jabil Unveils Plans for $42M Medical 3D Printing Center of Excellence

Jabil unveils plans for $42M medical 3D printing center of excellence

Jabil: Florida manufacturing giant announces plans to invest $42M, create 100+ jobs in New Mexico

Florida manufacturing giant announces plans to invest $42M, create 100+ jobs in New Mexico

Embroidery machine, with 3D, printed parts

Posted on Updated on

According to Hackaday, “Embroidery machine, with 3D, printed parts. Arduino components combined with 3D printed parts. OpenBuilds® V-Slot Belt & Pinion System.Such as an Arduino and stepper drivers for an economical DIY solution. It’s not shown in the photo here, but we particularly like the 3D printed sockets that are screwed into the tabletop. These hold the sewing machine’s “feet”, and allow it to be treated like a modular component that can easily be removed and used normally when needed.”

V-Slot™ Belt & Pinion Example Build

OpenBuilds

AND HE COULD HAVE BEEN THE FATHER OF 3D PRINTING

3D Printing News Alert(For 3D printing a wonder material for the future, graphene)

Posted on Updated on

Graphene is strong, light, thin and flexible. It is the thinnest substance capable of conducting electricity, is an efficient thermal conductor and is optically transparent. Graphene is also more resistant to tearing than steel and is almost impermeable.

For 3D printing a wonder material for the future, graphene.

According to GrapheneCa Head of Business Development David Robles,” Proactive Investors to discuss the technology company that is integrating graphene into the real world using their own environmentally friendly production process.

Robles telling Proactive about the company’s revenue streams and when they are expecting to be profitable.”

According to Hodge,” Adding graphene to plastic composites can improve the tensile strength and stiffness of packaging. Graphene won’t make the material indestructible but it may be possible to reduce packaging size while maintaining the same properties. This has obvious advantages for transporting fragile goods and may also contribute to recycling. Today, recycling plastics degrades the quality of the plastic – it can be recycled an average of three times, but adding graphene to recycled plastics can improve its strength so that it can be recycled many times more. Because they are printed, [the capacitive touch sensors] can be any size or shape and printed in volume.”

According to Chris Jones, technical manager at Novalia, a partner in the EU’s Graphene Flagship, “Our mission statement is to make technology disappear into everyday items.
The ink is supplied by Researchers at the University of Cambridge, University of Manchester and produced by micro fluidization.”

According to Francesca Rosella, co-founder of CuteCircuit, “A dress was designed to illustrate the material’s strength, transparency, and conductivity. The shape and decoration of the dress represent the design of a graphene crystal. We examined graphene under a microscope to see the hexagonal structure and enlarged it to help people understand graphene’s molecular structure.”

According to the TechRadar, “Mobile warming the graphene jacket can also conduct electricity, but creator Vollebak has decided to dampen down this ability to protect wearers. Prototypes of the jacket were so conductive that the wearer could hold a battery in one hand and a light bulb in the other, and have the bulb light up, but Vollebak decided that, although interesting, it was best to play it safe and make the material a little more resistant.”

According to Researchers at Osaka Universities co-author Kazuhiko Matsumoto,” Our biosensor enables highly sensitive and quantitative detection of bacteria that cause stomach ulcers and stomach cancer by limiting its reaction in a well-defined microvolume. They have invented a new biosensor using graphene, which is a material that consists of a one-atom-thick layer of carbon, to detect bacteria like those that attack the stomach lining and that have been linked to stomach cancer. When the bacteria interact with the biosensor, chemical reactions are triggered which are detected by graphene. To enable detection of the chemical reaction products, the researchers used microfluidics to contain the bacteria in tiny droplets that are close to the surface of the sensor.”

https://wp.me/p64ptu-2qz

 

https://youtu.be/IesIsKMjB4Y

 

 

https://eandt.theiet.org/content/articles/2019/06/graphene-what-is-it-good-for/

https://www.techradar.com/news/with-this-graphene-jacket-youll-never-be-too-hot-too-cold-or-too-smelly

https://www.sciencetimes.com/articles/22914/20190622/using-graphene-and-tiny-droplets-to-detect-stomach-cancer-causing-bacteria.htm

3D Printed Wristwatch

Posted on Updated on

According to Print Your Environment,” Concept build for a 3D printed modular watch. Made up of 3 printed and interchangeable parts (for different designs and colors) to create many different combinations. Designed in Fusion 360, printed at 0.06 mm layer height on Ultimaker 3. Finished and assembled.
3D Printed Wristwatch”.

https://www.adylinn.com

3D Printing News Alert(Ohio officials seek to promote 3D-printing of prosthetics via law change)

Posted on

Ohio officials seek to promote 3D-printing of prosthetics via law change.

According to Lt. Gov. Jon Husted, during a Statehouse news conference on Thursday, “Aaron is providing an innovative and creative solution to a problem that he and many other people face, and I don’t want outdated laws to stand in his or anyone else’s way.”
According to some comments from the video,”
1-
Mohammad Samheel
1 month ago
Anyone with a 3D printer can also help others by modifying and 3D printing these prosthetics. It’s available.
2-
littigTxFishing
1 month ago
Such a simple design no electronic parts why aren’t these being used more.
3-
Ryan K.
1 month ago (edited)
I have a robotics class in my high school, and the entire class has to build some with the tools they learned from previous years. I am the only one that is making a fully functional 3D printed arm.
4-
Saud Md. Munwar
1 month ago
Yes, this man is really working for mankind.
Salut Guillermo Martinez.
5-
Fern F
1 month ago
Bravo! 3D printing can be so much more than toys. This is a wonderful project ❤
6-
Rebecca Isaac
1 month ago
Besides being a good person he is a hero to help those who can not afford expensive robotic limbs…😗🤗🤗🤗🤗🤗🤗😗😗
7-
Talgat Tursynbekov
1 month ago
Robotic Hand building is tough.
8-
RedSnowGlobe
1 month ago
So a young guy who took a 3D design from the internet and is giving a custom printed version to people around the world for free, comments are praising him like a god wtf.”

http://codes.ohio.gov/orc/4779.02

https://www.cleveland.com/open/2019/06/ohio-officials-seek-to-help-3d-printing-prosthetics-charity-via-law-change.html

enablingthefuture.org

UCLA professor uses 3D printing for fashion designs

Posted on Updated on

According to ucla.edu/news,” UCLA faculty member Julia Koerner, whose 3D printed designs were featured in the movie Black Panther, which was recently recognized with a 2019 Academy Award for Best Costume Design.

Koerner, a Los Angeles-based Austrian architect and the founder of JK Design GmbH. She has won many awards for her work, which is at the convergence of architecture, product, and fashion design – specializing in additive manufacturing and robotic technology. In 2015, Julia launched an entirely 3D-Printed ready-to-wear collection entitled ‘Sporophyte’. Her collaborations involved 3D-Printed fashion pieces developed with Haute Couture Houses for Paris Fashion week and 3D printed costumes for Hollywood entertainment productions such as Marvel’s Black Panther in collaboration with Ruth Carter. Most recently she collaborated with Swarovski on a showpiece which displays Swarovski’s continued strive for innovation and the early developments of 3D-printing technology with glass”.

https://www.aud.ucla.edu/news/julia_koerner_3d_printing_913.html

https://www.juliakoerner.com/

https://www.juliakoerner.com/shop-1