Successful 3D 4D 5D Printing Business and Stocks

Porsche to offer new 3D-printed parts

Posted on Updated on

According to Porsche and
Autoblog.com ,” it will use 3D printing for parts when supplies are either low or completely gone. Parts are reproduced using the original tooling. When those tools are available, new ones are sometimes created. For models like the 959, creating all-new tooling is cost prohibitive and inefficient, leading to the 3D-printing process”.

https://www.porsche.com/

https://www.motoringresearch.com/car-news/porsche-classic-parts-3d-printing/

https://www.autoblog.com/2018/02/12/porsche-3d-printed-parts/#slide-7240464

Advertisements

First 3D Printing site on hospital campus to print ‘ORTHOPEDIC IMPLANTS’

Posted on Updated on


According to San Daniele del Friuli, Udine, Italy based co. and CEO of LimaCorporate Luigi Ferrari, “We are proud to be the first company to bring 3D printing of implants directly to a hospital organization, where the collaboration between top-ranked surgeons and engineers can drive innovation and easier access to patients in the US. This is what defines Lima. A company that has in the past, and will continue in the future,
strive to transform orthopedics by challenging the status quo,”.

The new facility, operated by Lima on the HSS main campus on New York’s Upper East Side.

https://www.limacorporate.com/news/41/limacorporate-heads-first-3d-printing-site-on-hospital-campus-to-address-complex-custom-orthopedic-implants.html

Dr. 3D Printer precautions for advanced manufacturing( Laser Cutting with a 3D Printer )

Posted on Updated on

I am using useful comments for this youtube video:)

Please use some precautions if you are using Laser Cutting with a 3D Printer” It is very very important to use the carbon monoxide detector.part cooling fan” style fan it will help you when you cut. It reduces the risk of something catching fire and blows away the burned wood so the laser can reach the uncut wood.

It might risk sooth accumulating on the lens and eventually blocking enough light that you damage the lens itself with the heat.
You need ventilation and more than just an open window. If you want to use the airbrush compressor into a vacuum pump to pull away from the smoke. I will be worried that you can see the laser beam through the safety-glasses.
If you want to prevent the face from getting charred, put painter’s tape on top.
If you want the laser performance to last you need another mini fan to blow out the smoke so the residue of that smoke won’t be impaired on the laser beam output if you don’t blow air in the output focus lens that lens Will get covered with the smoke residue and destroy it so you need to blow air on the output lens and evacuate the smoke at the same time, you can add a mechanical end stop to the laser to home the Z, as the laser never needs to be hitting the bed or print like a nozzle,

To prevent the scorching just add some masking tape on top of the plywood. Did you think about designing an enclosure for the hypercube? That would be the best for ventilation of all those nasty laser fumes”.
Suggestions for height adjustment–
+1 on adjusting the z height with each pass to keep the focal length the same and +1 on some air assist as the smoke will reduce the laser’s power. With both mods, you’d cut through in fewer passes.

https://www.patreon.com/Tech2C

3D Printing aids for ‘Arthritis’ Patients

Posted on Updated on

Arthritis is not only based on age anybody can have ‘Arthritis’ at any age.
In my opinion, research can change the bases of age.
I have seen so many young age people have ‘Arthritis’.
Nobody wants to talk about and they hide because. Arthritis is commonly used for old age diseases. According to the Department of Biomedical Engineering and Mechanical Engineering, Michigan Technological University, Houghton, “By 2040, more than a quarter of the U.S. population will have diagnosed arthritic conditions. Adults with arthritis and other rheumatic conditions earn less than average yet have medical care expenditures that are over 12% of average household income. Adaptive aids can help arthritis patients continue to maintain independence and quality of life; however, their high costs limit accessibility for older people and the poor. One method used for consumer price reduction is distributed manufacturing with 3-D printers. In order to assess if such a method would be financially beneficial, this study evaluates the techno-economic viability of distributed manufacturing of adaptive aids for arthritis patients”.

https://www.mdpi.com/2308-3417/3/4/89

https://theconversation.com/why-you-should-give-your-grandparents-a-3d-printer-for-christmas-108657